Filter Compensation Module
product description
download Google
●The (bracket type) module structure of the series filter reactor;
●Applicable to 800mm wide cabinet, 50 kvar is divided into 1 circuit switching;
●Capacitor rated voltage 525V, non-tuning coefficient 12.5%;
●When the step size is 50kvar, the maximum installation capacity of each standard cabinet is 250kvar;
●When the step size is 25kvar, the maximum installed capacity of each standard cabinet is 225kvar;
product model
Size selection
Technical Parameters
Features
●Antunable coefficient (reactance coefficient) 5.67, 7, 12 or 14%
●Capacitor rated voltage 400/450/480/525V
●Unlimited switching frequency, long service life
●Capacity range from 12.5 to 50kvar
●Low noise interference
●Short switching cycle
●Small size, integrated, simple installation.
Other parameters
Install wiring
1. Before installation, please check whether the data on the module nameplate is consistent with the model specification ordered.
2. The model and specification are correct before installation. The module is installed vertically in the way of bottom line entry, which is in line with people’s visual habits.
3. When wiring, pay attention to the marking of the module terminal, as shown in Figure 1. The three-phase input terminal is the power supply line, which is connected to the back end of the circuit breaker (fuse); the control line of the control unit is connected with the control line of the controller correspondingly.
Dimensions
ordering advice
1. The (bracket type) module structure of the series filter reactor;
2. Suitable for 800mm wide cabinet, 50kvar is divided into 1 circuit switching;
3. The rated voltage of the capacitor is 525V, and the non-tuning coefficient is 12.5%;
4. When the step size is 50 kvar, the maximum installed capacity of each standard cabinet is 250kvar;
5. When the step size is 25kvar, the maximum installed capacity of each standard cabinet is 225kvar.
