HomeBlog

Blog

Read practical engineering insights on harmonics, reactive power, voltage stability, equipment selection and commissioning for industrial and utility projects.

Voltage Sag Ride-Through Specification: Turn Event Logs into Acceptance Tests

Voltage Sag Ride-Through Specification: Turn Event Logs into Acceptance Tests

Specify residual voltage, duration, affected phases, critical loads and acceptance criteria before selecting voltage sag mitigation for an industrial process.

THD vs TDD: Read Harmonic Measurements Before Sizing a Filter

THD vs TDD: Read Harmonic Measurements Before Sizing a Filter

Compare current THD and TDD with worked examples, demand-current checks and a practical acceptance checklist before specifying an active harmonic filter.

APFC Panel Hunting: Diagnose Repeated Capacitor-Step Switching

APFC Panel Hunting: Diagnose Repeated Capacitor-Step Switching

Diagnose APFC capacitor-step hunting using event logs, CT and sensing checks, effective step kvar, control bands, delays, feedback, and protection history.

Power Factor Correction with Solar PV: Measure the Grid-Side Demand

Power Factor Correction with Solar PV: Measure the Grid-Side Demand

Understand why solar can lower grid-side power factor, calculate simultaneous kW and kvar, and coordinate inverter controls, capacitor steps, and SVG support.

Thyristor vs Contactor Switched Capacitor Bank: Choosing the Switching Duty

Thyristor vs Contactor Switched Capacitor Bank: Choosing the Switching Duty

Compare capacitor-bank switching methods by load variation, end-to-end response, residual voltage, step size, harmonics, thermal duty, and acceptance checks.

Medium Voltage Soft Starter vs VFD: How to Choose for Large Motors

Medium Voltage Soft Starter vs VFD: How to Choose for Large Motors

Compare MV soft starters and VFDs by starting torque, supply voltage drop, running-speed needs, motor compatibility, bypass, and practical RFQ requirements.